NTS309 with set of NTS-QM309 Quick jaw change base jaws

Code du produit: NTS309 & NTS-QM309

Quick jaw exchange gripper

Reduce jaw exchange time
Replace jaws without tools
Modification from an existing NTS gripper is possible
One set of hard jaws supports workpieces from φ20 to φ60 on NTS309
Proximity switches can not be used for the quick jaw change grippers.

Close Force(N): 1010
Open Force(N): 1120
* Air pressure set at 0.6 MPa.
Measurement Distance L(mm): 20
Jaw Stroke: 16mm(dia.), 8mm(per finger)

Envoyer un email à un distributeur local

Téléchargements:

Principales caractéristiques

Close Force(N): 1010
Open Force(N): 1120
* Air pressure set at 0.6 MPa.
Measurement Distance L(mm): 20
Jaw Stroke: 16mm(dia.), 8mm(per finger)
Repeatability(mm): ±0.01
Mass (kg): 0.70
Air Consumption per reciprocating (cm³): 50.2
Air pressure (MPa): 0.2 ~ 0.8
Operating Temperature (? ): 5 ~ 60

Pour en savoir plus

Note 1. Please install a check valve in the air-pressure circuit so that the gripper will not release a workpiece even if the air pressure drops down.
Note 2. A reed switch bracket is attached.
Note 3: Proximity switches can not be used for the quick jaw change grippers.
Note 4. The material of internal seals of grippers is nitrile rubber. If the fluororubber seals are needed, please consult Kitagawa distributor.

Vidéo

Voir plus: Grippers | 2 & 3 jaw grippers for robot arms

Restez à jour avec les dernières nouvelles ... Rejoignez la Liste de diffusion Kitagawa.